.. _headstage_neuropix2e: Neuropixels-2.0e Headstage ############################## The ONIX **Neuropixels-2.0e Headstage** is a serialized, multifunction headstage targeting `Neuropixels 2.0 probes `__. .. image:: /_static/images/headstage-neuropix2e/headstage-np2e-with-probes.png :align: center :alt: ONIX Headstage-Neuropixels-2.0e :scale: 15% - Two Neuropixels 2.0 probes - A BNO055 9-axis IMU for real-time, 3D orientation tracking - 0.640 g, 10.2 x 14.2 mm .. csv-table:: :widths: 18, 80 "*PCIe host firmware compatibility*", "v 1.0 and above" Coaxial Link *********************************** For details on data serialization and headstage gateware, have a look at the :doc:`serialization` page, which describes how coax headstages operate in general terms. The Neuropixels-2.0e Headstage has the following coaxial link properties: .. table:: :widths: 50 80 50 50 50 +------------------------+--------------------+----------+----------+----------+ | Parameter | Value | Min | Max | Unit | | | | | | | +========================+====================+==========+==========+==========+ | Serializer | TI DS90UB933 | | | | +------------------------+--------------------+----------+----------+----------+ | Coax Voltage | 5.0* | 3.0 | 5.5 | Volts | +------------------------+--------------------+----------+----------+----------+ .. note:: Have a look at the :doc:`tethers` page for more details on micro-coax headstage tethers .. important:: \*If your headstage is misbehaving, have a look at the :doc:`tether-voltage` page to confirm headstage power voltages Probe connector identification *********************************** The connector for Probe A is on the same side as the tether connector, while the connector for Probe B is on the opposite side. .. image:: /_static/images/headstage-neuropix2e/headstage-np2e-probe-connectors.png :align: center :alt: ONIX Headstage-Neuropixels-2.0e probe connectors